home *** CD-ROM | disk | FTP | other *** search
- Thursday 20-Jan-00
-
- LowRateScan
-
-
- This program demonstrates servo control using the Mini SSC II. It commands
- servo number 0 slowly and smoothly through its full range of travel.
-
- Before you run the program check that:
-
- * all configuration jumpers are off on the Mini SSC board,
- * Mini SSC is connected into the computer serial port as described in the
- manual,
- * servo is plugged into the board's output number 0 and
- * power is connected to the servo and to the board as described in the
- manual.
-
- This program was compiled with StormC Version 3.0 AmigaOS.
-